Disinfection byproducts of iopamidol, iohexol, diatrizoate and their distinct acute toxicity on Scenedesmus sp., Daphnia magna and Danio rerio.

The COVID-19 pandemic resulted in increasing the usage of iodinated contrast media (ICM), and thus an increase in the prevalence of ICM-contaminated wastewater. While ICM is generally safe, this has the potential to be problematic because as medical wastewater is treated and disinfected, various ICM-derived disinfection byproducts (DBPs) may be generated and released into the environment. However, little information was available about whether ICM-derived DBPs are toxic to aquatic organisms. In this study, the degradation of three typical ICM (iopamidol, iohexol, diatrizoate) at initial concentration of 10 µM and 100 µM in chlorination and peracetic acid without or with NH4+ was investigated, and the potential acute toxicity of treated disinfected water containing potential ICM-derived DBPs on Daphnia magna, Scenedesmus sp. and Danio rerio was tested. The degradation results suggested that only iopamidol was significantly degraded (level of degradation >98%) by chlorination, and the degradation rate of iohexol and diatrizoate were significantly increased in chlorination with NH4+. All three ICM were not degraded in peracetic acid. The toxicity analysis results indicate that only the disinfected water of iopamidol and iohexol by chlorination with NH4+ were toxic to at least one aquatic organism. These results highlighted that the potential ecological risk of ICM-contained medical wastewater by chlorination with NH4+ should not be neglected, and peracetic acid may be an environment-friendly alternative for the disinfection of wastewater containing ICM.

Direct Inhibition of SARS-CoV-2 Spike Protein by Peracetic Acid.

Peracetic acid (PAA) disinfectants are effective against a wide range of pathogenic microorganisms, including bacteria, fungi, and viruses. Several studies have shown the efficacy of PAA against severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2); however, its efficacy in SARS-CoV-2 variants and the molecular mechanism of action of PAA against SARS-CoV-2 have not been investigated. SARS-CoV-2 infection depends on the recognition and binding of the cell receptor angiotensin-converting enzyme 2 (ACE2) via the receptor-binding domain (RBD) of the spike protein. Here, we demonstrated that PAA effectively suppressed pseudotyped virus infection in the Wuhan type and variants, including Delta and Omicron. Similarly, PAA reduced the authentic viral load of SARS-CoV-2. Computational analysis suggested that the hydroxyl radicals produced by PAA cleave the disulfide bridges in the RBD. Additionally, the PAA treatment decreased the abundance of the Wuhan- and variant-type spike proteins. Enzyme-linked immunosorbent assay showed direct inhibition of RBD-ACE2 interactions by PAA. In conclusion, the PAA treatment suppressed SARS-CoV-2 infection, which was dependent on the inhibition of the interaction between the spike RBD and ACE2 by inducing spike protein destabilization. Our findings provide evidence of a potent disinfection strategy against SARS-CoV-2.

Viability of SARS-CoV-2 on lettuce, chicken, and salmon and its inactivation by peracetic acid, ethanol, and chlorine dioxide.

Since the first SARS-CoV-2 outbreak in Wuhan, China, there has been continued concern over the link between SARS-CoV-2 transmission and food. However, there are few studies on the viability and removal of SARS-CoV-2 contaminating food. This study aimed to evaluate the viability of SARS-CoV-2 on food matrices, depending on storage temperature, and inactivate the virus contaminating food using disinfectants. Two SARS-CoV-2 strains (L and S types) were used to contaminate lettuce, chicken, and salmon, which were then stored at 20,4 and -40 °C. The half-life of SARS-CoV-2 at 20 °C was 3-7 h but increased to 24-46 h at 4 °C and exceeded 100 h at -40 °C. SARS-CoV-2 persisted longer on chicken or salmon than on lettuce. Treatment with 70% ethanol for 1 min inactivated 3.25 log reduction of SARS-CoV-2 inoculated on lettuce but not on chicken and salmon. ClO2 inactivated up to 2 log reduction of SARS-CoV-2 on foods. Peracetic acid was able to eliminate SARS-CoV-2 from all foods. The virucidal effect of all disinfectants used in this study did not differ between the two SARS-CoV-2 strains; therefore, they could also be effective against other SARS-CoV-2 variants. This study demonstrated that the viability of SARS-CoV-2 can be extended at 4 and -40 °C and peracetic acid can inactivate SARS-CoV-2 on food matrices.

New trends in application of the fumigation method in medical and non-medical fields.

INTRODUCTION: In the twentieth century, fumigation became a very popular method of disinfection, although in the same century many agents used as fumigants were withdrawn for ecological reasons. Fogging (fumigation) is a relatively new disinfection technology using dry fog, which behaves more like a gas and easily fills the sanitized space, reaching all surfaces in the room. The undoubted advantage of fumigation is the possibility of disinfecting difficult to clean areas. Fumigation has become particularly important in the twenty-first century due to procedures related to combating and preventing the spread of the coronavirus that causes COVID-19. OBJECTIVE: The aim of this review article is to summarize the current state of knowledge in the field of fumigation on the basis of past results of original research, taking into account new trends and possibilities of its application. BRIEF DESCRIPTION OF THE STATE OF KNOWLEDGE: Due to the fact that fumigation is safe for apparatus, equipment, and electronics, while simultaneously enabling the highest possible bactericidal and virucidal levels, this method is widely used in various areas, both medical and non-medical. Fogging technology is used in the medical, pharmaceutical, and food industries, as well as in transportation, for air fumigation or surface disinfection in closed spaces, such as hospital and laboratory rooms, incubators, refrigerators, ships, trucks, railway containers, and aircraft, to name only a few. The most common fumigants are hydrogen peroxide and peracetic acid, and their mechanism of action is related to their oxidizing properties. SUMMARY: Hydrogen peroxide and peracetic acid are highly effective and non-toxic fumigants that can be safely used for fogging laboratory and medical equipment, pharmaceutical facilities, hospital rooms, and animal breeding rooms.

Is Peracetic Acid Fumigation Effective in Public Transportation?

The COVID-19 pandemic made more people aware of the danger of viruses and bacteria, which is why disinfection began to be used more and more often. Epidemiological safety must be ensured not only in gathering places, but also in home and work environments. It is especially challenging in public transportation, which is a perfect environment for the spread of infectious disease. Therefore, the aim of the study was the identification of bacteria in crowded places and the evaluation of the effect of fumigation with peracetic acid (PAA) in public transportation. Inactivation of microorganisms in buses and long-distance coaches was carried out using an automatic commercial fogging device filled with a solution of peracetic acid stabilized with acetic acid (AA) and hydrogen peroxide (H2O2). Before and after disinfection, samples were taken for microbiological tests. The most prevalent bacteria were Micrococcus luteus and Bacillus licheniformis.Staphylococcus epidermidis was only present in buses, whereas Staphylococcus hominis and Exiguobacterium acetylicum were only present in coaches. Statistical analysis showed a significant reduction in the number of microorganisms in samples taken from different surfaces after disinfection in vehicles. The overall effectiveness of disinfection was 81.7% in buses and 66.5% in coaches. Dry fog fumigation with peracetic acid is an effective method of disinfecting public transport vehicles.

Thermal fogging with disinfectants and antifreezes enables effective industrial disinfection in subzero cold-chain environment.

AIM: During several local COVID-19 outbreaks in China in 2020, SARS-CoV-2 or its RNA was isolated or detected from frozen food or packages, revealing the lack of effective disinfection measures in the frozen food chain and risk of transmission. We explored the possibility that disinfectant plus antifreeze could be delivered as thermal fog to realize effective disinfection at subzero temperatures. METHODS AND RESULTS: We selected two disinfectant-antifreeze combinations, didecyl dimethyl ammonium bromide (DDAB) - propylene glycol (PPG) and peracetic acid (PAA) - triethylene glycol (TEG), and each combination is used with a custom-optimized thermal fogging machine. The two fogs were tested in -20°C freezer warehouses for their disinfection efficacy against a coronavirus porcine epidemic diarrhoea virus (PEDV) field strain, a swine influenza virus (SIV) field strain, and three indicator bacteria, Escherichia coli, Staphylococcus aureus and Bacillus subtilis endospores. At -20°C, the DDAB-PPG or PAA-TEG thermal fogs settle within 3.5 to 4.5 h and effectively inactivated PEDV with median tissue culture infective dose of 10-3.5 0.1 ml-1 and SIV-H1N1 with hemagglutination titre of 26  ml-1 within 15-60 min. DDAB-PPG could inactivate S. aureus and E. coli vegetative cells (106  cfu ml-1 ) within 15-60 min but not effective on B. subtilis spores, while PAA-TEG could disinfect B. subtilis spores more effectively than for S. aureus and E. coli. CONCLUSIONS: We showed that a practical subzero temperature disinfection technology was effective in killing enveloped viruses and vegetative bacteria or bacterial spores. DDAB-PPG or PAA-TEG thermal fogging may be a practical technology for cold-chain disinfection. SIGNIFICANCE AND IMPACT OF THE STUDY: This subzero temperature disinfection technology could help to meet the urgent public health need of environmental disinfection in frozen food logistics against pandemic and other potential pathogens and to enhance national and international biosecurity.

Decontamination of disposable respirators for reuse in a pandemic employing in-situ-generated peracetic acid.

BACKGROUND: During shortages of filtering face pieces (FFP) in a pandemic, it is necessary to implement a method for safe reuse or extended use. Our aim was to develop a simple, inexpensive and ecological method for decontamination of disposable FFPs that preserves filtration efficiency and material integrity. MATERIAL AND METHODS: Contamination of FFPs (3M Aura 9320+) with SARS-CoV-2 (1.15 × 104 PFUs), Enterococcus faecium (>106 CFUs), and physiological nasopharyngeal flora was performed prior to decontamination by submersion in a solution of 6 % acetic acid and 6 % hydrogen peroxide (6%AA/6%HP solution) over 30 minutes. Material integrity was assessed by testing the filtering efficiency, loss of fit and employing electron microscopy. RESULTS AND DISCUSSION: Decontamination with the 6%AA/6%HP solution resulted in the complete elimination of SARS-CoV-2, E. faecium and physiological nasopharyngeal flora. Material characterization post-treatment showed neither critical material degradation, loss of fit or reduction of filtration efficiency. Electron microscopy revealed no damage to the fibers, and the rubber bands' elasticity was not affected by the decontamination procedure. No concerning residuals of the decontamination procedure were found. CONCLUSION: The simple application and widespread availability of 6%AA/6%HP solution for decontaminating disposable FFPs make this solution globally viable, including developing and third world countries.

Facile fabrication of antibacterial and antiviral perhydrolase-polydopamine composite coatings.

In situ generation of antibacterial and antiviral agents by harnessing the catalytic activity of enzymes on surfaces provides an effective eco-friendly approach for disinfection. The perhydrolase (AcT) from Mycobacterium smegmatis catalyzes the perhydrolysis of acetate esters to generate the potent disinfectant, peracetic acid (PAA). In the presence of AcT and its two substrates, propylene glycol diacetate and H2O2, sufficient and continuous PAA is generated over an extended time to kill a wide range of bacteria with the enzyme dissolved in aqueous buffer. For extended self-disinfection, however, active and stable AcT bound onto or incorporated into a surface coating is necessary. In the current study, an active, stable and reusable AcT-based coating was developed by incorporating AcT into a polydopamine (PDA) matrix in a single step, thereby forming a biocatalytic composite onto a variety of surfaces. The resulting AcT-PDA composite coatings on glass, metal and epoxy surfaces yielded up to 7-log reduction of Gram-positive and Gram-negative bacteria when in contact with the biocatalytic coating. This composite coating also possessed potent antiviral activity, and dramatically reduced the infectivity of a SARS-CoV-2 pseudovirus within minutes. The single-step approach enables rapid and facile fabrication of enzyme-based disinfectant composite coatings with high activity and stability, which enables reuse following surface washing. As a result, this enzyme-polymer composite technique may serve as a general strategy for preparing antibacterial and antiviral surfaces for applications in health care and common infrastructure safety, such as in schools, the workplace, transportation, etc.

Disinfectants In Interventional Practices.

PURPOSE OF REVIEW: This review aims to provide relevant, aggregate information about a variety of disinfectants and antiseptics, along with potential utility and limitations. While not exhaustive, this review's goal is to add to the body of literature available on this topic and give interventional providers and practitioners an additional resource to consider when performing procedures. RECENT FINDINGS: In the current SARS-CoV2 epidemiological environment, infection control and costs associated with healthcare-associated infections (HAIs) are of paramount importance. Even before the onset of SARS-CoV2, HAIs affected nearly 2million patients a year in the USA and resulted in nearly 90,000 deaths, all of which resulted in a cost to hospitals ranging from US$28 billion to 45 billion. The onset SARS-CoV2, though not spread by an airborne route, has heightened infection control protocols in hospitals and, as such, cast a renewed focus on disinfectants and their utility across different settings and organisms. The aim of this review is to provide a comprehensive overview of disinfectants used in the inpatient setting.

Airborne Disinfection by Dry Fogging Efficiently Inactivates Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2), Mycobacteria, and Bacterial Spores and Shows Limitations of Commercial Spore Carriers.

Airborne disinfection of high-containment facilities before maintenance or between animal studies is crucial. Commercial spore carriers (CSC) coated with 106 spores of Geobacillus stearothermophilus are often used to assess the efficacy of disinfection. We used quantitative carrier testing (QCT) procedures to compare the sensitivity of CSC with that of surrogates for nonenveloped and enveloped viruses, including severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), mycobacteria, and spores, to an aerosolized mixture of peroxyacetic acid and hydrogen peroxide (aPAA-HP). We then used the QCT methodology to determine relevant process parameters to develop and validate effective disinfection protocols (≥4-log10 reduction) in various large and complex facilities. Our results demonstrate that aPAA-HP is a highly efficient procedure for airborne room disinfection. Relevant process parameters such as temperature and relative humidity can be wirelessly monitored. Furthermore, we found striking differences in inactivation efficacies against some of the tested microorganisms. Overall, we conclude that dry fogging a mixture of aPAA-HP is highly effective against a broad range of microorganisms as well as material compatible with relevant concentrations. Furthermore, CSC are artificial bioindicators with lower resistance and thus should not be used for validating airborne disinfection when microorganisms other than viruses have to be inactivated.IMPORTANCE Airborne disinfection is not only of crucial importance for the safe operation of laboratories and animal rooms where infectious agents are handled but also can be used in public health emergencies such as the current severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) pandemic. We show that dry fogging an aerosolized mixture of peroxyacetic acid and hydrogen peroxide (aPAA-HP) is highly microbicidal, efficient, fast, robust, environmentally neutral, and a suitable airborne disinfection method. In addition, the low concentration of dispersed disinfectant, particularly for enveloped viral pathogens such as SARS-CoV-2, entails high material compatibility. For these reasons and due to the relative simplicity of the procedure, it is an ideal disinfection method for hospital wards, ambulances, public conveyances, and indoor community areas. Thus, we conclude that this method is an excellent choice for control of the current SARS-CoV-2 pandemic.

Endoscopes used in positive and critically ill patients are SARS-CoV-2 negative at virological assessment.

The risk of SARS-CoV-2 transmission in endoscopy is not only between patients and endoscopy staff but is also through inadequately reprocessed endoscopes. There are no studies that could confirm the efficacy of current ways of endoscope reprocessing on the elimination of SARS-CoV-2. The aim of this pilot study was to evaluate the efficacy of high disinfection of endoscopes with peracetic acid on eliminating SARS-CoV-2, but surprisingly we found that the virus cannot be detected on any part of endoscopes used in critically ill patients due to SARS-CoV-2 and this was the same for all types of endoscopies and procedures. If confirmed in larger studies, these findings will probably open a new scenario in the overall understanding of the real impact of the virus.

Decontamination of common healthcare facility surfaces contaminated with SARS-CoV-2 using peracetic acid dry fogging.

BACKGROUND: The SARS-CoV-2 pandemic has highlighted the urgent need for safe and effective surface decontamination methods, particularly in healthcare settings. AIM: To evaluate the effectiveness of peracetic acid (PAA) dry fogging in decontaminating healthcare facility surfaces experimentally contaminated with SARS-CoV-2. METHODS: Nine materials (stainless steel, latex painted wood, unsealed hardwood, melamine countertop, vinyl flooring, clear plastic, faux leather, computer keyboard button, and smartphone touch screen) were surface contaminated with >106 median tissue culture infectious dose (TCID50) of SARS-CoV-2, and allowed to dry before exposing to PAA dry fogging. FINDINGS: When fumigated with PAA dry fog for 1 h, no infectious SARS-CoV-2 virus was recovered from any of the experimentally inoculated surface types. By contrast, high titres of infectious virus were recovered from corresponding untreated drying controls of the same materials. CONCLUSION: Standard surface decontamination processes, including sprays and wipes, are laborious and frequently cannot completely decontaminate sensitive electronic equipment. The ease of use, low cost, and overall effectiveness of a PAA dry fogging suggest that it should be considered for decontaminating healthcare settings, particularly intensive care units where severely ill SARS-CoV-2 patients are cared for.

Decontamination of N95 masks for re-use employing 7 widely available sterilization methods.

The response to the COVID-19 epidemic is generating severe shortages of personal protective equipment around the world. In particular, the supply of N95 respirator masks has become severely depleted, with supplies having to be rationed and health care workers having to use masks for prolonged periods in many countries. We sought to test the ability of 7 different decontamination methods: autoclave treatment, ethylene oxide gassing (ETO), low temperature hydrogen peroxide gas plasma (LT-HPGP) treatment, vaporous hydrogen peroxide (VHP) exposure, peracetic acid dry fogging (PAF), ultraviolet C irradiation (UVCI) and moist heat (MH) treatment to decontaminate a variety of different N95 masks following experimental contamination with SARS-CoV-2 or vesicular stomatitis virus as a surrogate. In addition, we sought to determine whether masks would tolerate repeated cycles of decontamination while maintaining structural and functional integrity. All methods except for UVCI were effective in total elimination of viable virus from treated masks. We found that all respirator masks tolerated at least one cycle of all treatment modalities without structural or functional deterioration as assessed by fit testing; filtration efficiency testing results were mostly similar except that a single cycle of LT-HPGP was associated with failures in 3 of 6 masks assessed. VHP, PAF, UVCI, and MH were associated with preserved mask integrity to a minimum of 10 cycles by both fit and filtration testing. A similar result was shown with ethylene oxide gassing to the maximum 3 cycles tested. Pleated, layered non-woven fabric N95 masks retained integrity in fit testing for at least 10 cycles of autoclaving but the molded N95 masks failed after 1 cycle; filtration testing however was intact to 5 cycles for all masks. The successful application of autoclaving for layered, pleated masks may be of particular use to institutions globally due to the virtually universal accessibility of autoclaves in health care settings. Given the ability to modify widely available heating cabinets on hospital wards in well-resourced settings, the application of moist heat may allow local processing of N95 masks.

Scalable in-hospital decontamination of N95 filtering face-piece respirator with a peracetic acid room disinfection system.

BACKGROUND: Critical shortages of personal protective equipment, especially N95 respirators, during the coronavirus disease 2019 (COVID-19) pandemic continues to be a source of concern. Novel methods of N95 filtering face-piece respirator decontamination that can be scaled-up for in-hospital use can help address this concern and keep healthcare workers (HCWs) safe. METHODS: A multidisciplinary pragmatic study was conducted to evaluate the use of an ultrasonic room high-level disinfection system (HLDS) that generates aerosolized peracetic acid (PAA) and hydrogen peroxide for decontamination of large numbers of N95 respirators. A cycle duration that consistently achieved disinfection of N95 respirators (defined as ≥6 log10 reductions in bacteriophage MS2 and Geobacillus stearothermophilus spores inoculated onto respirators) was identified. The treated masks were assessed for changes to their hydrophobicity, material structure, strap elasticity, and filtration efficiency. PAA and hydrogen peroxide off-gassing from treated masks were also assessed. RESULTS: The PAA room HLDS was effective for disinfection of bacteriophage MS2 and G. stearothermophilus spores on respirators in a 2,447 cubic-foot (69.6 cubic-meter) room with an aerosol deployment time of 16 minutes and a dwell time of 32 minutes. The total cycle time was 1 hour and 16 minutes. After 5 treatment cycles, no adverse effects were detected on filtration efficiency, structural integrity, or strap elasticity. There was no detectable off-gassing of PAA and hydrogen peroxide from the treated masks at 20 and 60 minutes after the disinfection cycle, respectively. CONCLUSION: The PAA room disinfection system provides a rapidly scalable solution for in-hospital decontamination of large numbers of N95 respirators during the COVID-19 pandemic.